Studio-technologies 740 Bedienungsanleitung

50026-0504, Issue 3Model 740 Audio MixerUser GuideIssue 3, May 2004This User Guide is applicable for serial numbers:M740-00151 and later© 2004 by Stud

Issue 3, May 2004 Model 740 User GuidePage 10 Studio Technologies, Inc. Model 740740’s 3-pin IEC 320 C14-compatible inlet connector.Mic/Line Inputs

Model 740 User Guide Issue 3, May 2004Studio Technologies, Inc. Page 11 Model 740The output utilizes a 3-pin male XLR-type connector for interconnec

Issue 3, May 2004 Model 740 User GuidePage 12 Studio Technologies, Inc. Model 740so that pin 2 is signal high (+ or hot), pin 3 is low (– or cold),

Model 740 User Guide Issue 3, May 2004Studio Technologies, Inc. Page 13 Model 740connect pin 2 to high (+ or hot) and both pins 1 and 3 to shield.A

Issue 3, May 2004 Model 740 User GuidePage 14 Studio Technologies, Inc. Model 740Before connecting the Model 740 to AC mains power, determine the a

Model 740 User Guide Issue 3, May 2004Studio Technologies, Inc. Page 15 Model 7403. Using an appropriate adapter cable, connect a high-input-imped

Issue 3, May 2004 Model 740 User GuidePage 16 Studio Technologies, Inc. Model 740In the mic (out) position, the expected nominal input level range

Model 740 User Guide Issue 3, May 2004Studio Technologies, Inc. Page 17 Model 740dynamic range of the main bus. The oper-ating threshold of the comp

Issue 3, May 2004 Model 740 User GuidePage 18 Studio Technologies, Inc. Model 740(Remember that 0 VU typically indicates a device’s reference opera

Model 740 User Guide Issue 3, May 2004Studio Technologies, Inc. Page 19 Model 740A rotary control sets the output level of the headphone outputs and

This page intentionally left blank.

Issue 3, May 2004 Model 740 User GuidePage 20 Studio Technologies, Inc. Model 740outputs are compatible with stereo head-phones but really provide

Model 740 User Guide Issue 3, May 2004Studio Technologies, Inc. Page 21 Model 740be adjusted to reduce the amount of signal being sent to the main a

Issue 3, May 2004 Model 740 User GuidePage 22 Studio Technologies, Inc. Model 740Reference Tone Frequency ConfigurationTwo shorting jumpers are use

Model 740 User Guide Issue 3, May 2004Studio Technologies, Inc. Page 23 Model 740microphone selection (or adding a windscreen) will resolve the issu

Issue 3, May 2004 Model 740 User GuidePage 24 Studio Technologies, Inc. Model 740SpecificationsGeneral Audio Parameters:Frequency Response: 20 Hz-2

Model 740 User Guide Issue 3, May 2004Studio Technologies, Inc. Page 25 Model 740Metering:Type: 10-segment LED, modified VU ballisticsSource: config

Issue 3, May 2004 Model 740 User GuidePage 26 Studio Technologies, Inc. Model 740This page intentionally left blank.

Model 740 User Guide Issue 3, May 2004Studio Technologies, Inc. Page 3 Model 740Table of ContentsIntroduction ...

Issue 3, May 2004 Model 740 User GuidePage 4 Studio Technologies, Inc. Model 740This page intentionally left blank.

Model 740 User Guide Issue 3, May 2004Studio Technologies, Inc. Page 5 Model 740 Model 740IntroductionWhat This User Guide CoversThis User Guide is

Issue 3, May 2004 Model 740 User GuidePage 6 Studio Technologies, Inc. Model 740Reliability over the long haul was a Model 740 design criteria. To

Model 740 User Guide Issue 3, May 2004Studio Technologies, Inc. Page 7 Model 740to be monitored. This allows monitoring of the main audio bus, along

Issue 3, May 2004 Model 740 User GuidePage 8 Studio Technologies, Inc. Model 740is connected directly to the Model 740 by way of a standard 3-pin d

Model 740 User Guide Issue 3, May 2004Studio Technologies, Inc. Page 9 Model 740to adjust its volume. This prevents the confusing situation of havin